LF STATIONARY READER

LF Proximity RFID Reader With Configured Offline Operational Mode

ID RWA02.10

ID RWA02.10-AD / -B is designed as a wall-mounted device for contactless data exchange with common 125 kHz transponders for applications like access control, time attendance and payment systems.

For power supply an external power supply unit is necessary, data exchange with a computer or other equipment is carried out via a serial (RS232 or RS485) or a Data-/Clock interface.

Scope of delivery:
- Reader ID RWA02.10-AD or ID RWA02.10-B
- Surface spacer for surface mount installation
- Installation manual


TECHNICAL DATA

Dimensions (W x H x D)

Reader 84 mm x 84 mm x 22 mm

(3.33 in x 3.33 in x 0.87 in)

Surface spacer 78 mm x 78 mm x 18 mm

(3.07 in x 3.07 in x 0.71 in)

Housing Plastic (ASA) / Front: acrylic glass

Color Corpus: white/Front panel: black

Weight approx. 150 g

Protection class IP 54
Temperature range

Operation –25 °C up to 70 °C

Storage –40 °C up to 85 °C

Relative air humidity 95 % (non-condensing)

MTBF 307.000 h

Supply voltage 12-24 V AC / DC

Current consumption max. 2,5 W

Interfaces

ID RWA02.10-AD RS232

ID RWA02.10-B RS485 (max. 32 devices / data bus)

LED Bicolor (Red / Green / Orange)

Operating frequency 125 kHz

Antenna integrated, approx. 70 mm x 70 mm

Beeper integrated

Relay 1 closer

Digital inputs 2 (max. cable length 3 m)

Read range maximum 7 cm*

Supported transponders 125 kHz ReadOnly transponders1
125 kHz Read/Write transponders2
Operation modes Polling-Mode

1 For example ID CTxA, H4001, H4002, H4022, H4102, Unique, Q5, e5555 etc.

2 For example ID DTxB, ID DTxC, HITAG 1, HITAG S etc.

* Read ranges depend on the used transponders; here made statements relate on an inlet size of 76 mm x 45 mm (3.00 in x 1.78 in)


STANDARD CONFORMITY

Radio approval

Europe EN 300 330

USA FCC 47 CFR Part 15

USA FCC 47 CFR Part 15

EMC EN 301 489

Safety
Low voltage EN 60950
Human Exposure EN 50364
Environment WEEE – 2002/96/EC
RoHS – 2002/95/EC