LF STATIONARY READER

Stand-alone Access control terminal

ID ZK

ID ZK is a read only (RO) terminal, which requires as a stand-alone device no connection to a PC or a controller. It can be programmed to monitor the entrance to a door, a turnstile or a barrier and is working with RO and RW transponders. With an included master card these transponders can be programmed or deleted from the system, individually.

Although the ID ZK is a RO reading unit, it can also read the serial numbers of RW transponders. So it can be integrated into existing RW applications without the need to issue new transponders.

Although the ID ZK has an integrated antenna, optional an external antenna is available. This may be attached to an object  from outside and connected to the ID ZK which is installed inside. So for example the controller for a door lock relay would be placed indoors, protected against manipulation or vandalism.

ID ZK is also available as a circuit board without housing.


TECHNICAL DATA

Dimensions (W x H x D)         113 mm x 83 mm x 24,5 mm

 

Weight                                   120 g

 

Housing                                  Plastic ASA

 

Protection class                      IP 54

 

Operating frequency               125 kHz

 

Supply voltage                        12…24 V / DC
12…15V / AC
50-60 Hz

 

Current consumption              max. 1,5 W

 

Read range                            up to 10 cm*

 

Antenna                                 integrated

 

Interface                                 no

 

Indicator                                 two-digit seven segment display

 

Supported transponders         125 kHz transponders**

 

Memory                                  200 transponders

 

Inputs                                     no

 

Outputs                                  1 Relay (changeover contact)
load-bearing capacity 24 V / AC; 1,5 A

 

Temperature range

   Operation                          –25 °C up to 70 °C

   Storage                             –25 °C up to 70 °C

 

Relative air humidity               5…95 % (non-condensing)

 

  

      *    Depending on transponder type and transponder size

 

     **    For example EM 4001, EM 4002, EM 4022, EM 4102, Unique, HITAG 1, HITAG S, Q5, 555x etc.