HF HANDHELD READER

HF Hand-held Blade Reader

ID ISC.PRH200

ID ISC.PRH200 is a compact, wireless RFID handheld reader (ISO 15693 or ISO 18000-3M3), who is mainly used in libraries. Typical applications in this environment are: Inventory, searching of media, seeking for media, and automatic checking / rewriting of the AFI bytes or EAS bit of all media.

Further applications are laundries, logistical processes as well as document and asset management.

Depending on the type of media and the reading distance, the output power can be switched between two levels (Standard Mode: 1.5 W and Boost Mode: 4 W). Power supply is a Lithium Ion rechargeable battery that allows for operating times up to 16 hours*.

5 multi-colored LED lights and an integrated sounder act as display elements. Thereby all relevant states are visible on both sides of the device.

Communication with a data base or computer is through a WLAN interface on the reader, that supports the most common encryption protocols.


TECHNICAL DATA

Dimensions (W x H x D)         460 mm x 260 mm x 27 mm

                                              antenna thickness approx. 1.5 mm

 

Weight (incl. battery pack)      approx. 600 g

Housing                                  Plastic ABS/PC

Protection class                      IP 30

Colors                                    RAL 7046

                                              RAL 7047

 

Operating frequency               13.56 MHz

RF Transmitting power

  - Standard Mode                 1.5 W

  - Boost Mode                      4.0 W

 

Supply voltage                        Battery pack

Typ. Operation time normal conditions*

  - Standard Mode                 16 hours

  - Boost Mode                      8 hours

 

Button                                    2 (On/Off antenna; On/Off reader and change between Standard- / Boost Mode)

Signal generator, optical         5 LED (HF-On, special functions,

                                              WLAN, battery, Power-On/Mode)

Signal generator, acoustic      1 Sounder

 

Interfaces                               WLAN / Wi-Fi

Wi-Fi Security Protocols         WEP / WPA / WPA2

 

Supported transponders         ISO 15693, ISO18000-3M3 (opt.)

 

Protocol Modes                      FEIG ISO Host Mode, Buffered

                                              Read Mode, Notification Mode

 

Temperature range

   Operation                              0 °C to 40 °C

   Storage                             –25 °C to 55 °C

Relative air humidity               5…80 % (non condensing)

 

 

STANDARD CONFORMITY

Radio approval
   Europe                              EN 300 330

   USA                                  FCC 47 CFR Part 15

   Canada                             RSS-210, Issue 8

EMC                                      EN 301 489

 

 

*Typical operation time at normal conditions: In practical application, the antenna should be turned on only if the antenna / reader is near enough to the relevant transponders.

Regarding the ratio „Antenna on/off“, FEIG ELECTRONIC expects a ratio of 50%.

 

**Charging time: 3.5 – 4 hours